To clean plastic dice, you can use mild soap and water to gently scrub them. Rinse thoroughly, and allow them to air dry completely before using them again.
Cleaning plastic dice is a simple process that can be done with common household items. To ensure the longevity and cleanliness of your plastic dice, follow these detailed steps:
-
Preparation: Gather all the plastic dice that need cleaning and prepare a suitable cleaning area. Lay down a clean towel or place a plastic basin on a flat surface to prevent the dice from rolling away.
-
Remove dirt and debris: Begin by inspecting the dice for any visible dirt or debris. Use a soft brush or toothbrush to gently scrub the dice, paying attention to the corners and edges where dirt may accumulate. This step helps remove surface-level dirt and prepares the dice for a deeper clean.
-
Create a cleaning solution: In a bowl or sink, mix lukewarm water with a mild dish soap. Avoid using harsh cleaning chemicals or abrasive substances that could damage the plastic.
-
Scrub the dice: Dip the toothbrush into the soapy water solution and use it to scrub each die gently. Focus on the indentations and pips (the dots or numbers on the dice) to remove any dirt or grime that may have accumulated there. Take care not to use excessive force, as this may cause the pips to fade or come off.
-
Rinse thoroughly: After scrubbing each die, rinse them under cool running water to remove any residual soap. Ensure that all the soap suds are washed away.
-
Dry the dice: Place the dice on a clean, dry towel or rack, ensuring they are spaced apart to allow air circulation. It is essential to let the dice air dry completely before using them again. Pat them dry gently with a clean cloth if needed.
A quote from iconic game designer Richard Garfield may shed some light on the importance of cleanliness in gaming: “Taking care of your game components, including dice, ensures a more enjoyable and fair gaming experience.”
Additional interesting facts about cleaning plastic dice:
-
Different plastic types: Dice can be made from various types of plastic, such as acrylic, polyethylene, or polyresin. Understanding the type of plastic your dice are made from can help determine the best cleaning method.
-
Wet wipes as an alternative: If you need a quick clean and don’t have access to soap and water, using sanitizing wet wipes can provide a temporary solution. However, these wipes may not remove stubborn dirt as effectively as a thorough scrub.
-
Frequency of cleaning: While occasional cleaning is beneficial, excessively cleaning plastic dice may lead to wear and tear. Strike a balance between keeping them clean and preserving their aesthetic and functional qualities.
Including a table comparing different cleaning methods for plastic dice:
| Cleaning Method | Effectiveness | Ease of Use | Usage Frequency |
|---|---|---|---|
| Mild soap and water | High | Easy | Periodic |
| Wet wipes | Medium | Easy | Quick |
| Vinegar solution | Medium | Moderate | Periodic |
| Dishwasher (top rack) | High | Moderate | Infrequent |
| Bleach solution | High | Difficult | Rarely |
Note: Always prioritize the manufacturer’s instructions for cleaning dice, as certain materials or finishes may have specific cleaning requirements.
A visual response to the word “How do you clean plastic dice?”
This YouTube video demonstrates how to clean and straighten die cutter plates. The process involves wetting the plates, applying dish soap, and scrubbing with a toothbrush to remove debris. The plates are then heated and bent in the opposite direction to straighten them out. Flipping the pads over periodically can help prevent warping. Finally, the plates are dried and sanitized for a thorough cleaning. The YouTuber also suggests an inexpensive dollar store product for maintaining the cleanliness of crafting materials and tools.
I found further information on the Internet
the first step in the process is to dump your dice in a bowl. and then fill that bowl with water. I then proceed to massage the dice into the soapy water. doing my best to get all of the surface area of each die.
Handful of dice, one depress on the dishsoap dispenser, rub hands together with dice between, run under hot water. Drop in dishtowel to dry. Done.
More intriguing questions on the topic
What do you clean dice with?
Response will be: so we’ve included some steps to follow when it’s time to clean those dice and get them ready for the next game.
- In a nonabrasive, wet cloth, place a little bit of soap.
- Work the soap into a lather.
- On the surface of the dice, apply the soapy lather.
- With lukewarm water, rinse the metal die.
How do you take care of resin dice?
In reply to that: Avoid storing your resin dice in the sun or nearby any sources of UV rays. This can cause your dice to discolor. Also avoid excess heat as it can potentially melt the resin, depending on what type it is, as well as harsh chemicals or fragrances. Those can also have a potential chance to discolor your dice.
How do you clean metal dice?
Answer to this: The Cleaning Process
This simple clean should be completed after every game. If your dice require a more thorough clean or polish, you can use a small amount of dish soap. Use a wet paper towel or a non-abrasive washcloth to create a lather. Apply the soap lather to each die, then rinse with cool or lukewarm water.
Can I keep metal dice in a bag?
Metal dice, while sturdy, can still be susceptible to damage. So, the better you care for them, the longer they will last and be aesthetically pleasing. If you’re going to be carrying your metal dice around with you, consider a zipped, foam pouch, bag, storage box, etc.
How do you clean a dice tray?
Wooden dice trays can be wiped clean with a damp cloth. Avoid using harsh chemicals or cleaners as they can damage the finish. If your tray is made from solid wood, you can also use a furniture polish to keep it looking shiny and new. Plastic dice trays can be cleaned with soap and water or a glass cleaner.
How do you clean plastic?
Wipe the plastic. Use a clean cloth or sponge to wipe the vinegar solutions around the plastic. Spray more vinegar solution on areas with built up grime, and scrub them liberally until the dirt is removed. Rinse with water. Use clean water to rinse the vinegar solution from the plastic; dry it with a towel.
How do you remove a mold from a dice?
Cover the master dice up to 5mm above. Tap the cup lightly to release any air bubbles, and leave your silicone to cure for at least 24 hours before removing the mold from the cup. Standard molds, like the ones listed above, are all polyhedral dice. This is a dice with multiple flat surfaces, all equal in size.
How long does it take a dice to harden?
The answer is: Here are some examples of objects you can use in your dice: It takes about 24 hours for the resin to harden, after which you can handle the mold. If the resin has cured properly, it will be hard and smooth to the touch, but if it is still tacky, the resin has not cured properly.
How do you clean plastic?
As a response to this: Wipe the plastic. Use a clean cloth or sponge to wipe the vinegar solutions around the plastic. Spray more vinegar solution on areas with built up grime, and scrub them liberally until the dirt is removed. Rinse with water. Use clean water to rinse the vinegar solution from the plastic; dry it with a towel.
How do you clean plastic chess pieces?
In reply to that: If you own plastic chess pieces, you’ll be pleased to know that they’re the least likely to need aftercare, so if they get dirty or tarnished, you won’t have to worry too much about damaging them during cleaning. A wipe down with a damp cloth or a clean with mild soapy water will suffice.
What kind of plastic is used to make dice?
As an answer to this: It normally costs thousands of dollars to create each mold, so dice manufacturers usually try to re-use the same mold for many different colors, keeping all the dice the same shape. Normally, the kind of plastic used for manufacturing dice is polymethyl methacrylate (PMMA).
How do I make a good quality dice?
In reply to that: Bubbles are the enemy – if you really want to make good quality dice, you’ll need avacuum chamber. Put both the silicone and resin in the chamber. Two part molds are feasible, but it’s…tricky. You will likely end up doing a lost of post-processing depending on how yours turn out. You will either have flashing, spruces, or both.